KCA060S4D, Electric/Electric, Packaged Rooftop Unit, Standard Efficiency, 13 SEER, 5 Ton, R-410A, Landmark
Cat # : L0876 | Model/Part #: KCA060S4D
Cat # : 11F51
Model/Part # C1CURB71A-1Updating Price...
Cat # : 11F52
Model/Part # C1CURB72A-1Updating Price...
Cat # : 11F50
Model/Part # C1CURB70A-1Updating Price...
Cat # : 43W27
Model/Part # K1CURB55AUpdating Price...
Cat # : 11F53
Model/Part # C1CURB73A-1Updating Price...
Cat # : 27G87
Model/Part # RTD9-65-RUpdating Price...
Cat # : 17W53
Model/Part # T1TRAN10AN1Updating Price...
Cat # : 14W37
Model/Part # T1EH0225AN1YUpdating Price...
Cat # : 52W37
Model/Part # 101356-02Updating Price...
Cat # : 54W20
Model/Part # 100929-05Updating Price...
Cat # : 87N54
Model/Part # T8100-B-LNUpdating Price...
Cat # : 77N39
Model/Part # T8100-D-LNUpdating Price...
Cat # : 14W35
Model/Part # T1EH0075AN1YUpdating Price...
Landmark® Rooftop Units Standard Efficiency 2-7.5 tons
Packaged Electric/Electric 60 hz and 50 hz
Performance Marked by Flexibility
- New 7.5 to 25-ton high-efficiency units (gas/electric and electric/electric)
- Up to 13.0 SEER, 14.5 IEER and 12.7 EER
- 2 to 25 tons (gas/electric and electric/electric)
- 2 to 20 tons (heat pump)
- Meet or exceed ASHRAE 90.1-2004 standards
- Available MSAV® supply fan provides year-round savings and comfort with reduced energy consumption, improved indoor air quality and code compliance
- Up to 61% supply fan savings with optional MSAV
- Direct-spark ignition enhances efficiency
- Isolated compressor compartment allows performance check during normal compressor operation without disrupting airflow
- Slide-out blower allows quick belt tensioning, adjustment or replacement and makes cleaning the blower easier
- Accessible gas compartment provides generous space to access all gas components, making analysis and service easier
- Optional hinged access panels provide quick access to components and protect panels and roof from damage during servicing
- Full-perimeter base rail provides greater structural integrity, so the unit is easier to handle when rigging and transporting
- Fork slots on three sides make it easy to pick up and transport units from almost any angle
- Independent motor mount allows for easy and efficient service access without removing the top panel
- Environ™ Coil System on 7.5 to 25-ton standard and high-efficiency gas/electric and electric/electric units reduces the time necessary to clean the condensing coil
- Landmark units with the most popular features and configurations are stocked and ready for fast delivery or pickup at commercial depots across North America
- Pre-defined supply fan motor/drive combinations make selecting components to meet static and airflow requirements quick and easy
- Thermostatic expansion valves on high-efficiency models and fixed orifice on standard-efficiency models
- Environ™ Coil System provides reliable operation in a wide range of applications
- Scroll compressor provides reliable, long-term operation
- Interlink compressor delivers increased reliability and better efficiency
- Corrosion-resistant, removable, double-sloped drain pan provides application flexibility, durability and improved serviceability
- First stage operation of the optional MSAV® supply fan reduces humidity, providing better space comfort
- Field or factory-installed MERV 8 or 13 filters reduce airborne particles
- Field-installed CO2 sensors reduce levels of CO2 and VOCs by introducing fresh outside air
- Field powered GFI
- Economizers with single or dual enthalpy control
- Electric heat
- 50% constant volume powered exhaust fan
- CO2 sensor
- Return and supply air smoke detectors
- Low ambient kits
- Hail guards
- Coil guards
- Link to the L Connection® Network line of commercial controls with an optional Network Thermostat Controller
- LPG Conversion Kit (gas/electric only)
- -40°F cold weather kit (gas/electric only)
- Combustion air intake or flue exhaust extensions (gas/electric only)
- Blower proving switch
- Dirty filter switch
- Manual outdoor air dampers (25%)
- Motorized outdoor air dampers
- MSAV (multi-stage air volume) supply fan
- Coil corrosion protection
- Stainless steel heat exchanger
- Hinged doors
Factory options or field accessories
- Economizer (Standard and Title 24 High Efficiency)
- Barometric relief dampers
- High and low-static drive kits
- Heaters (electric/electric only)
- BACnet module
- Novar 2051 ETM module
|Minimum Order Quantity||0.0|
|Base Unit of Measure||Unit(S)|
|Product Voltage||208/230v 3ph 60 hz|
|EAN / UPC||66255143176|
|Blower Type or Drive #||Direct|
|Heat||Optional Electric Heat|
|Return Opening Horizontal||11 X 29|
|Return Opening Downflow||11 X 29|
|Supply Opening Horizontal||19.5 x 20|
|Supply Opening Downflow||18 X 20|
|Gross Weight||625 LB|
|Cooling Capacity||5.0 Ton Cooling|
|Package Unit Cabinet||A Cabinet|
|Package Unit Type||Cooling Package Unit|
|Package Unit Tonnage||5.0|
|Package Unit Efficiency||Standard Efficiency|
|Unit Cabinet Height||Short (34" Coil)|
|Voltage||208-230 Volt/3 Ph|
|Air Filter Type||2" MERV4 - Std Filter|
|Unit Blower Type||Constant Volume Direct Drive|
|Blower Motor||.75 Hp Direct Drive|
|Coil System||Environ Coil System|
|Unit Fuse Block||35 Amp|