Low NOx Elite Series, Upflow/Horizontal Gas Furnace, 80% AFUE, 110,000 Btuh, Power Saver Constant Torque, 2 Stage, 4-5 Ton, EL280UH110XE60C
Cat # : 17D33 | Model/Part # : EL280UH110XE60C
Thanks to its new Power Saver™ constant-torque motor, EL280UH110XE60C two stage gas furnace will operate more efficiently, adjusting airflow based on demand and using less energy in both heating and cooling modes. The Power Saver™ motor reduces heating costs and delivers higher SEER ratings compared to standard single-stage motors. Quiet operation, balanced temperature, and an energy rating of 80% AFUE is what you can expect from the EL280E.
Brand | Lennox |
Catalog Number | 17D33 |
Model/Part Number | EL280UH110XE60C |
Minimum Order Quantity | 0.0 |
Base Unit of Measure | Unit(S) |
Product Depth | 27-3/4 IN |
Product Height | 33 IN |
Product Width | 21 IN |
Product Voltage | 120V 1ph 60 hz |
Blower Motor | Constant Torque |
Configuration | Upflow/Horizontal |
iComfort Enabled | false |
Heating Type | 2 Stage |
Low Nox | Low NOx |
Tonnage | 5 Ton |
Gross Weight | 156 LB |
Family | EL280E |
Cooling Capacity | 5.0 Ton Cooling |
Heating Capacity | 110, 000 Btuh |
Efficiency | 80.0 AFUE |
CFM | 1100 - 2200 |
Hertz | 60 hz |
Phase | 1 Phase |
Series | Elite Series |
Maximum Overcurrent Protection (Amps) | 15 |
California Only
Approved by the California Energy Commission and meets California Nitrogen Oxides Standard (NOx) limits of 40 ng/J.
This furnace does not meet the South Coast Air Quality Management District (SCAQMD) Rule 1111 and San Joaquin Valley Air Pollution Control District (SJVAPCD) Rule 4905 NOx emission limit (14 ng/J) and cannot be installed within the SCAQMD and SJVAPCD areas.